Description
3.5 inch TFT High Brightness RGB Full View Angle Specifications
Appearance and Structural Design
The 3.5 inch TFT module measures 76.84mm × 63.84mm × 3.35mm, with an effective display area of 70.08mm × 52.56mm. This 3.5 inch TFT features a lightweight design; the weight of the version without a touchscreen is yet to be determined, making it suitable for portable devices with space and weight constraints. Both the backlight module and the AVDD boost module of this 3.5 inch TFT are independently designed for easy system integration.In terms of driver solution, this module is equipped with the ST7703 driver IC. As a high-performance display driver chip, the ST7703 supports multiple interface protocols, enabling high frame rates and rich color display, ensuring delicate and smooth picture quality.
Electrical Characteristics and Power Management
The typical digital power supply VCI for the 3.5 inch TFT module is 3.3V. The analog circuit power supply AVDD, gate voltage VGH, and VGL of this 3.5 inch TFT all have defined ranges, and users must ensure power supply stability in their designs. The backlight of the 3.5 inch TFT uses four LEDs connected in series, with a typical operating voltage of 18V, an operating current of 20mA, and an LED lifespan of up to 30,000 hours (at 25°C).
Initialization and Reset Timing
The 3.5 inch TFT module has built-in initialization code, and users can perform a hardware reset via the RESX pin. The reset timing for this 3.5 inch TFT requires a low-level width of at least 1ms, and a wait of at least 5ms after the reset before sending commands. Sleep Out commands must not be sent within 120ms for the 3.5 inch TFT. The initialization code example provides a standard power-on reset procedure, which users can optimize according to their actual platform.
Product Selection Guide – How to Choose the Right TFT-H035A33 Series Module
When selecting the TFT-H035A33 series module, users need to comprehensively consider factors such as the actual application scenario, main control platform interface type, display requirements, and environmental conditions. The following are some key selection dimensions:
- Interface Type Selection:The TFT-H035A33 series modules support multiple interface modes, including 8-bit and 24-bit RGB interfaces, as well as 2-channel, 3-channel, and 4-channel LVDS interfaces. Users should select the appropriate interface type based on the display interface supported by the main control chip. For example, if the main control chip is an STM32 series MCU, an 8-bit RGB interface is generally recommended; if the main control chip is a high-performance ARM processor or FPGA, a 24-bit RGB or LVDS interface can be selected to obtain higher data transfer rates and display quality.
- Touchscreen Selection:This module offers three options: without a touchscreen, with a capacitive touchscreen (CTP), and with a resistive touchscreen (RTP). Capacitive touchscreens support multi-touch, have high light transmittance, and are suitable for modern smart devices; resistive touchscreens are suitable for industrial environments, supporting glove operation and pen input. Users can choose the appropriate type based on their application scenario.
- Environmental Adaptability: The module operates at temperatures ranging from -30℃ to +80℃ and is stored at temperatures ranging from -30℃ to +85℃, making it suitable for industrial applications. If the product needs to operate in extreme temperature or high humidity environments, it is recommended to refer to reliability test data (such as high temperature and high humidity, thermal shock, vibration, etc.) for selection verification.
FAQs about 3.5 inch TFT with RGB interface | IPS full-viewing-angle TFT LCD | High-brightness TFT LCD visible in sunlight
Q1:I need a display that is clearly visible even in bright outdoor environments. What solutions does this 3.5-inch 320×240 resolution TFT LCD screen offer?
A1:This was a key challenge we focused on addressing when designing this product. Our 3.5-inch 320×240 resolution TFT LCD screen is equipped with a backlight system boasting a brightness of up to 800 cd/m². This high brightness effectively suppresses screen glare, ensuring that all data, readings, and interface elements remain clearly readable even in direct sunlight, thereby enhancing operator safety and efficiency in outdoor applications.
Q2: Does the TFT-H035A33QVIST8N54 module support direct connection to the STM32F407?
A2:Yes. STM32F407 series MCUs typically have an FSMC interface, configurable for 8-bit or 16-bit RGB output. The TFT-H035A33 module supports an 8-bit RGB interface. Users can connect DB[7:0] to the STM32’s FSMC data lines, and use the HSYNC, VSYNC, DCLK, and DE signals to achieve display. It should be noted that the STM32 requires an external pixel clock, or a 6MHz~8MHz DCLK signal generated via PLL frequency multiplication.
